Jungheinrich EFG 113 Betriebsanleitung Seite 87

Positioning the forks with an integrated fork
positioner (option)
CAUTION!
Do not use the fork positioner to clamp
loads.
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 68).
Procedure
• Press the (68) button and at the same time turn the MULTI-PILOT (57) anti-
clockwise, the forks will spread apart.
• Press the (68) button and at the same time turn the MULTI-PILOT (57) anti-
clockwise, the forks will move together.
The forks are now positioned.
Synchronising the alignment of the fork tines
with an integrated fork positioner (optional
equipment)
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 68).
– The fork tines are no longer aligned.
Procedure
• Press the (68) button and at the same time turn the MULTI-PILOT (57) anti-
clockwise, the forks will spread apart.
• Press the (68) button and at the same time turn the MULTI-PILOT (57) anti-
clockwise, the forks will move together.
The fork tines are now synchronised.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
86
57
57
68
68