Jungheinrich EFG 113 Betriebsanleitung Seite 86

Twin operation
Requirements
– To prepare the truck for operation, (see "Preparing
the truck for operation" on page 68)
Procedure
• To lower the load handler and tilt the mast forward
at the same time, push the Multi Pilot forward and
to the right.
• To lift the load handler and tilt the mast back at the
same time, push the Multi Pilot back and to the left.
• To lower the load handler and tilt the mast back at the same time, push the Multi
Pilot forward and to the left.
The mast is now tilted back / forward.
Positioning the integrated sideshift (option)
Requirements
– Truck prepared for operation, (see "Preparing
the truck for operation" on page 68).
Procedure
• Press the (112) button to move the load
handler to the right (from the driver's
viewpoint).
• Press the (111) button to move the load
handler to the left (from the driver's viewpoint).
The sideshifter is now positioned.
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.
111
112
85