Jungheinrich EFG 113 Betriebsanleitung Seite 128

Telescopic forks
Hydraulic operations
1 Attachment: clean and lubricate.
2 Check hydraulic ports and tighten if necessary.
3 Check cylinder seals.
4 Test attachment, check settings and check for damage.
Check piston and piston rod for damage, check the setting and
5
adjust if necessary.
Attachment: check bearing points, guides and stops for wear and
6
damage, grease and clean these components.
Check attachment is properly secured to the truck and the
7
supporting elements.
Check that hydraulic ports, hose and pipe lines are secure, check for
8
leaks and damage.
Boom
Hydraulic operations
Check attachment is properly secured to the truck and the
1
supporting elements.
Video system
System components
1 Test the camera, make sure it is secured and clean.
2 Test the monitor, make sure it is secured and clean.
3 Check wiring is secure and check for damage.
Weigher sensors / switches
Electrical System
1 Test weigher and check for damage.
Weather-proof system
Electrical System
1 Check fuse ratings.
Chassis and Superstructure
1 Test the windscreen heating and check for damage.
2 Test the doors and check for damage.
W A B C
t
t
t
t
t
t
t
t
W A B C
t
W A B C
t
t
t
W A B C
t
W A B C
t
W A B C
t
t
127