Jungheinrich EFG 113 Betriebsanleitung Seite 89

Safety instructions for sideshifter and fork adjuster attachments
WARNING!
When using multi fork adjusters (multi pallet clamps), restricted visibility and reduced
lateral tilt resistance can result in accidents.
Adapt the travel speeds to the visibility and load.
Make sure you have enough visibility when reversing.
Safety instructions for clamping attachments (e.g. baling clamps, barrel
clamps, grabs etc.)
WARNING!
Falling loads can cause accidents
This can result in malfunctions and the load can fall accidentally.
Clamping attachments may only be added to trucks which have a button to enable
additional hydraulic functions.
Clamping attachments must only be operated on trucks will auxiliary hydraulics
ZH1, ZH2 or ZH3.
When connecting the attachment make sure that the hydraulic lines of the
attachment are connected to the right ports, (see "Fitting additional attachments"
on page 94).
Safety instructions for rotary attachments
WARNING!
A non-centred centre of gravity can result in accidents
When using rotary devices and non-centred loads, the centre of gravity can be
displaced from the centre with a high risk of accidents.
Adapt the travel speed to the load.
Lift the load from the centre.
88