Statistics Evaluation Of Data Entered Manually; Deleting Data; Entering Date And Time - Mettler Toledo RA-510M Bedienungsanleitung

8.4

Statistics evaluation of data entered manually

(function 3: Manu. Statis.)
The RA-150 statistically evaluates data which you enter manually, but does not store them.
You can enter maximum 100 sets of data.
-FUNCTION-
3.Manu. Statistics Calcu.
Dimension:
No.
01
02
03
The statistical data are displayed and can be printed out with or without the entered data (see
Section 8.3).
8.5 Deleting data (function 4: DataDelete)
With this function you can delete individual results of a series which should not be included in
the statistical evaluation. On printout of the statistical data, the number of results is reduced,
the sample number of the "deleted" result is marked with an asterisk.
As the result is only marked as deleted, you can "fetch it back".
-FUNCTION-
4.Data Deletion
Low samp. No.: [03]
No. Data
01 1.33299
02 1.33298
03 1.33289
*
– To "fetch it back", press the -/Disp. key again.
8.6 Entering date and time (function 5: Calendar)
This function allows you to enter or change the date and time.
-FUNCTION-
5.Calendar
Year :[94]
Month:[021
Day :[10]
RA-510M
METTLER TOLEDO
Data
[ ]
[ ]
[ ]
94/02/10 10:10
Hour: [10]
Minutes:[10]
– Display the selection menu Dimen-
sions with the -/Disp. key and select
the desired unit.
– Enter the data in sequence and confirm
the last entry twice with ENTER:
– Enter the sample number whose result
you wish to delete and confirm with
ENTER. This marks the same number
in the list.
– Press the -/Disp. key: An asterisk ( * ) is
positioned in front of this number
*
showing the result has been deleted.
The current time is displayed.
– Enter year, month, day, hour and min-
utes in succession and confirm each
entry with ENTER.
Functions
25