Selecting A Method; Printing A Method; Changing A Method - Mettler Toledo RA-510M Bedienungsanleitung

7.2

Selecting a method

– Press the Method key
-METHOD-
No Temp.
0 20.00
1 20.00
2 20.00
3 20.00
4 20.00
Temp./Result: The defined measurement temperature and result output are shown (see
Sections 7.3.1 and 7.3.2).
Protect Off: The method is not protected, in other words you can change its parameters
at any time.
– To protect it, select "On" with the -/Disp. key and confirm with ENTER.
This locks the Meas. Para ., Calcu. Para. and Print Para. keys for this
method.
– To unblock the protected method, select "Off" with the -/Disp. key and
7.2.1

Printing a method

You can print out every selected method when the method mask is displayed:
– Press the Print key: The measurement, calculation, record and sample parameters are
printed out.
You can print out the parameters of each individual group with the Print key as soon as the
group has been selected.
7.3

Changing a method

For every selected method, you can change the measurement, record and sample parame-
ters, for methods 1, 2 and 3 you can also change the calculation parameters.
RA-510M
METTLER TOLEDO
Result Protect
nD Off On
nD Off On
nD Off On
nD Off On
Brix Off On
confirm with ENTER.
0: Method 0 is selected.
– Select a different method using the
arrow key or enter its number directly.
– Confirm with ENTER if you do not wish
to protect the method.
Methods
15