Functions; Sample File - Mettler Toledo RA-510M Bedienungsanleitung

8.

Functions

The RA-510M has ten functions for additional possibilities, e.g. statistical calculations,
recalculations, entry of date and time and switching the temperature display. You can select
and activate these 10 functions using the Function key and enter or change the correspond-
ing parameters; you can print out the parameters of the following functions: 0 to 3 and 5 to 7.
-FUNCTION-

0.Sample File

1.Re-Calcu.
2.Auto Statis.
3.Manu.Statis.
4.Data Delete
5.Calendar
8.1 Sample file (function 0: Sample File)
You can define this function if you have attached a sample changer. You enter the method
and sample data in this file in advance so that the samples can then be measured in
sequence.
-FUNCTION-
0.Sample File
File :
Meas.No.: [100]
Next No.: [
Method : Fix
Method Fix:
Method Variable: You can enter all methods with sample data if you confirm this setting with
-FUNCTION-
0.Sample File
No. Meth.
01 1
02 1
03 1
04 1
RA-510M
METTLER TOLEDO
6.RS-232C
7.Option
8.Mem All Clr.
9.Temp.U&Name
Off On
1]
Variable
You can enter sample data for the method currently active only if you
confirm this setting with ENTER.
ENTER (see following mask).
Samp. Lot
01-01
01-02
01-03
01-04
You select the "Sample File" function if
you confirm 0 with ENTER
– Select a different function with the arrow
key or enter its number directly and
confirm with ENTER.
File Off: The function is not active, its
parameters are locked.
File On: The function is active.
Meas. No.: Enter the number of measu-
rements (1-100).
Next No.: Enter the number of the next
measurement.
No.: The number defined under
Meas. No. is entered.
Meth.: The method currently active is
entered for the number. You can
change this.
Samp.: The series/sample numbers are
entered. You can change these.
Lot: Enter the lot number.
Functions
23