Sample Parameters - Mettler Toledo RA-510M Bedienungsanleitung

Methods
7.3.4

Sample parameters

– Press the Sample key (method 1 is selected):
-SAMPLE-
Sample No.: [01]-[01]
Lot No.: [
– Enter the series number (01-99) and confirm with ENTER.
– For the start of a new series, enter a new series number.
A series can comprise maximum 100 samples, in other words 100 results can be stored per
method. If you change the series number (or enter the same number again and confirm with
ENTER),
• the stored results of the preceding series are cleared (see Section 8.3).
• the first result of this series is printed out with the instrument identification, the blank line
for the substance name and your own name. All subsequent reports of the series contain
only the sample number, the result and the measurement temperature.
– Enter the sample number (01-99) and confirm with ENTER.
With every measurement, the sample number is automatically incremented by 1.
– If necessary, enter the lot number (with minus and numeric keys).
22
[Method 1]
]
Sample File On
Series number
Sample number
Input field for lot number
Displayed if you have activated function
0 (see Section 8.1)
METTLER TOLEDO
RA-510M