Mettler Toledo RA-510M Bedienungsanleitung Seite 22

Methods
Replacing data (Parameters Set: "Manu" has been confirmed with ENTER)
Under this menu option, you can both change the refractive index term used to calculate the
curve and enter the coefficients A, B (C, D) of a calculation function manually. You select the
menu option if the calculation function is known in advance.
Terms ("Data Replace" is displayed with the -/Disp. key)
-CALCU. PARA.-
Data Replace: x←nD
x←nD nx←nD-1
x←nD-R
Coefficients ("Data Replace" has been confirmed with ENTER)
-CALCU. PARA.-
A+Bx
A: [ 0.00000E+0]
B: [ 0.00000E+o]
20
[Method 1]
x←1/nD-1
[Method 1]
[x←nD ]
– Select the desired term with the
-/Disp. key and confirm with ENTER.
With the "Auto" parameter the nD-R
term is used as standard as it optimizes
the calculation algorithm.
If you calculate the concentration of dif-
ferent substances using the refractive
index, you can enter the coefficients of
known equations.
You can store maximum 3 calculation
functions in the RA-510M. If you need
more, it is quicker to enter known coef-
ficients than the complete data pairs un-
der the menu option "Auto".
METTLER TOLEDO
RA-510M