Optional: Connecting An Energy Meter - Bosch BPT-M Touch Installationsanleitung

34 | Electrical installation
BPT-M Touch | Installation manual
When you have connected the power supply, the
sensor LED display lights up (Connecting the supply
voltage, p. 45).
5.4 Optional: connecting an energy
meter
Materials required
Slotted screwdriver

Energy meter; S0 pulse rate at least 1000 pulses/

kWh
Connection cable (not included in the scope of

delivery): 2-pin cable with a cable cross-section of
2
0.75 mm
(1)
S0
CAN
DC
–
kWh
AC
~
(4) (5)
5.5: Energy meter wiring diagram
[1]
BPT-M Touch
[2]
Electrical consumer
[3]
Energy consumption meter
The energy consumption records the energy
consumed by the consumers in the household.
[4]
Central inverter with connected solar generator
(2)
(3)
kWh
kWh kWh
(6)
English
(7) (8)
Bosch Power Tec GmbH