Registration In The Internet Portal; Setting Up The Bpt-M Touch For Data Transfer - Bosch BPT-M Touch Installationsanleitung

48 | Telecommunication installation
BPT-M Touch | Installation manual
6.2.1

Registration in the Internet portal

Until the system is registered in the Internet portal,
the BPT-M Touch can transmit data, but it cannot be
assigned to the system and is lost. The manufacturer
recommends that the system should be registered
before installation.
Registration is completed by the installer. The owner
of the system receives their access data after you
have successfully registered the system.
▶
Procedure
1. Open the website www.bpte-web.com
2. Enter your user name.
3. Enter your password.
4. Click on Login to confirm your entries on this page
and continue to the next page.
5. In the New System menu, you can register the PV
system
as a separate system

 for an existing customer
for a new customer

Registration will take five to ten minutes. After the
system is correctly registered, an overview of all
the data relevant to the system is displayed.
If you have any difficulties with the registration,
you can find help in the Help texts provided in the
Internet portal. If the information is not sufficient,
contact the manufacturer's service centre.
6.2.2 Setting up the BPT-M Touch for data
transfer
Prerequisites
System registered in the Internet portal

Standard-type router present with Internet access

DHCP service activated in the router

English
Bosch Power Tec GmbH