Bosch BPT-M Touch Installationsanleitung Seite 112

42 | Electrical installation
BPT-M Touch | Installation manual
Please note the following here:
Place the split ferrite as close as possible to the

connector plug
5.10: Split ferrite opened on the CAN cable
9. Close the split ferrite.
Please note the following here:
Completely lock the housing into place when

closing
5.11: Split ferrite closed on the CAN cable
10.Fix the split ferrite on the underside using the
cable ties.
11.Connect the plug connector with the BPT-M Touch.
■
The CAN cable is connected.
English
Bosch Power Tec GmbH