Error Messages - VOLTCRAFT VC-1506 Bedienungsanleitung

19. error Messages

The Multicharger VC-1506 has various monitoring and protective functions for flawless operation and to protect the
electronics. In case of a malfunction, a warning signal is given, and relevant information appears on the display in
plain language.
106
The polarity of the accumulator poles has been switched.
The connection to the accumulator has been broken, e.g. if the
accumulator has been disconnected during the charging pro-
cess.
A short-circuit has been established on the charger output.
The input voltage (operating voltage) for the charger is too low.
The voltage of a LiPo, LiIon, LiFe accumulator to be charged is
incorrectly configured.
The charger has established that there is an internal problem.
Should this message permanently be displayed, it is possible that
the charger is defective; have it checked by a specialist workshop
or qualified technician.