Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
selecting the menus and submenus / setting the values
+
Use the „Batt Type/Stop" key in the main menu to scroll forward and the „
backwards.
•
In the main menu, use the „Batt Type/Stop" to select the submenu desired and confirm the selection with the
„Start/Enter" key.
•
Use the „+>" key to scroll forward in the submenu, the „
input value.
•
To change a value in a submenu item, press the „Start/Enter" key. The adjustable value displayed blinks.
•
Use the „+>" or „
" key to change the value blinking on the display.
-
<
•
Hold the „+>" or „
" key depressed to run through the values quickly.
-
<
•
Save the (changed) value using the „Start/Enter" key or change to the next adjustable value for the submenu
item.
•
Use the „Batt Type/Stop" key to leave the settings menu, which will take you back to the main menu.
please heed the following points before connecting/charging the accumulator:
•
If you have not done so already, please read chapter 5 (Safety Instructions) and 6 (Notes on the
Accumulators) completely and ensure that you have understood the information there.
•
Do you know all of the information about your accumulator that you need to know? Unknown or
unlabelled batteries for which you do not know the necessary values may not be connected/charged!
•
Have you selected the correct charging program for the type of accumulator you are using?
Selecting the wrong settings will damage the charger and the accumulator and present a risk of fire
and explosion!
•
Have you selected the appropriate charge current?
•
Have you selected the correct voltage (e.g. for multiple-cell LiPo batteries)?
A dual-cell LiPo accumulator can, under certain circumstances, be connected in parallel (3.7V) or in
series (7.4V).
74
" key to scroll backwards, or to increase/decrease the
-
<
" key to scroll
-
<
Werbung
Kapitel
Inhaltsverzeichnis
