VOLTCRAFT VC-1506 Bedienungsanleitung Seite 93

• Change this as usual using the buttons „+>" and „
• If only the star blinks, the „+>" or „
the battery type, CHARGE, DISCHARGE, STORAGE, BALANCE, CYCLE, etc are possible.
example:
-
• If you now keep the button „Start/Enter" depressed for approx. 3 seconds, all settings are saved in the memory
selected at the beginning.
+
Of course, the data in the 5 memory slots is preserved, even if the charger is separated from the supply
voltage.
This way, you can save the data for the transmitter accumulator, for example (e.g. NiMH, charge cur-
rent 400mA) and for a flight accumulator (LiPo, 1A charge current, 3 cells).
" keys can be used to select between the various programs. Depending on
-
<
+
", confirm the value using the „Start/Enter" button.
-
<
Use the „+>" or „ " keys to select the discharge current and the
-
<
end-of-charging voltage and confirm with the „Start/Enter" key.
Use the „+>" or „ " keys to select the sequence discharge/charge
-
<
or charge/discharge as well as the number of cycles.
93