Setting Up The Model; A) Inserting The Elevator - Reely SKY Tiger Moth Bedienungsanleitung


11.

Setting up the Model

Before starting with the assembly of the model, prepare an appropriate surface To achieve excellent flight perform-
ance, your model is made of light moulded foam. The disadvantage of this material is, however, a sensitive surface.
Small inattentions during the assembly of the model lead very quickly to ugly dents and holes in the surface.

a) Inserting the Elevator

Insert the elevator (1) into the prepared slot in the end of the
fuselage (2) according to the adjacent figure.
The linkage lever of the elevator must point downwards to-
wards the steering linkage (also see figure 9, top illustra-
tion).
Turn the elevator so that it is located centrally and the hinged
line (3) is at a 90° angle to the longitudinal axis of the fuse-
lage (4).
Figure 7
46