D) Installing The Wings - Reely SKY Tiger Moth Bedienungsanleitung

d) Installing the Wings

First screw on the two canopies (1) according to the right
and left sides of the fuselage adjacent illustration.
The screw apertures are already prepared. If required, grind
the screws to a slight point to facilitate turning in.
Mount the top wing (2) and attach it with the four fastening
screws. For this, turn the model upside down (see figure 11,
lower illustration).
Remove the protective film of the double-sided adhesive
tape (3) at the wing braces (4) and glue the braces pre-
cisely to the grooves (5) on the bottom of the upper wing.
The wing brace must slant backwards in flight direction.
Figure 12
Figure 9
Figure 11
49