Reely SKY Tiger Moth Bedienungsanleitung Seite 50

Remove the servo extension cable (6) from the wing aper-
ture in the fuselage and connect the aileron servo (8) to the
Futaba plug with reverse polarity protection of the exten-
sion cable (7).
Then place the lower wing centrally on the model and at-
tach it with the included rubber rings (9). The bolts of the
wing braces must reach through the prepared apertures of
the lower wing (see figure 14).
When putting on the lower wing, ensure that the
connection cable of the aileron is not squeezed
between the fuselage and the wing.
The attachment of the wing braces on the underside of the
lower wing is performed with two safety clips each (9). To
prevent the wing from being damaged when the clips are
pushed on, the wing protective foil (10) must be placed on
the bolts of the wing braces first.
50
Figure 13
Figure 14