IFM Electronic Ecomat 100 Original-Programmierhandbuch Seite 283

ifm Programmierhandbuch SmartController (CR2530, CR2532) v03.03
Anhang
Index SubIdx Parameter name
0x2022 0x0 Output – short circuit
0x1 Short circuit OUT00...OUT07
0x2023 0x0 Output – open circuit
0x1 Open circuit OUT00...OUT07
0x2024 0x0 Output – overload
0x1 Overload OUT00...OUT01
0x2025 0x0 Input analog – overcurrent
0x1 Overcurrent IN00...IN03
Legende
Data type: ro = read only / rw = read and write / wo = write only
Data type Default Details
ro USINT 1 Largest sub-index supported
ro USINT 0 0 = normal
1 = short circuit
ro USINT 1 Largest sub-index supported
ro USINT 0 0 = normal
1 = open circuit
ro USINT 1 Largest sub-index supported
ro USINT 0 0 = normal
1 = overload
ro USINT 1 Largest sub-index supported
ro USINT 0 0 = normal
1 = overcurrent
283
2018-05-18
Integriertes E/A-Modul: Beschreibung
channels (bit coded)
0b---- ---X = OUT00
0b---- --X- = OUT01
0b---- -X-- = OUT02
0b---- X--- = OUT03
0b---X ---- = OUT04
0b--X- ---- = OUT05
0b-X-- ---- = OUT06
0bX--- ---- = OUT07
channels (bit coded)
0b---- ---X = OUT00
0b---- --X- = OUT01
0b---- -X-- = OUT02
0b---- X--- = OUT03
0b---X ---- = OUT04
0b--X- ---- = OUT05
0b-X-- ---- = OUT06
0bX--- ---- = OUT07
channels (bit coded)
0b---- ---X = OUT00
0b---- --X- = OUT01
channels (bit coded)
0b---- ---X = IN00
0b---- --X- = IN01
0b---- -X-- = IN02
0b---- X--- = IN03