Compatibility Of Centerlock Rear Brake Disc Assemblies - Orbea Blue Paper Rise Hydro 2023 Technisches Handbuch

84 | ORBEA
COMP ON ENTS OF T HE S H I MA N O A N D
ORBEA RS ELECTRICAL SYSTEM
COMPATIBILITY NOTICE. GEN2 ELECTRI-
CAL SYSTEM COMPONENTS
The Orbea components of the electri-
cal system (internal battery -540Wh or
360Wh-, Range Extender, cable harness
and Smart Charger) are not compatible
with Rise, Kemen or Urrun models from
S H I MANO C OMP O N E N TS*
1
2
mm
3
4
5
6
7
* Shimano components are available from one of the
TECHNICAL MANUAL
These Orbea Ebike Systems components
from the 2023 range are designed to guar-
antee compatibility with Shimano EP801
and EP6 motors, and Shimano Gen2 com-
or 360Wh), the Range Extender and the
Smart Charger are marked with the Gen2
mark to identify their compatibility with
ORBEA RS COMPONENTS ART NO.
8
540Wh 36V Gen2
9
360Wh 36V Gen2
10
11
2A-4A Gen2
EU/US/UK/AUS
12
with screws Gen1/Gen2
13
14
15
B LUE PAPER RIS E · H YD RO 2023
COM PATIBIL ITY O F C ENTERLOC K
REAR BRAKE DISC ASSEMBLIES
Original Orbea assemblies with Centerlock wheels and
discs use Shimano RT-EM600 and Shimano RT-EM300
In assemblies with Centerlock wheels, if it is necessary to
replace the rear brake disc, or if you wish to replace the
wheels with Centerlock wheels on assemblies with 6-bolt
lowing rear brake disc models with a magnet integrated
into the braking plate:
· Shimano RT-EM810, RT-EM910
Shimano brake discs with the speed sensor magnet inte-
X974
grated in the Centerlock locking nut are not compatible with
and therefore will not provide the system with the correct
X975
COMPATIBLE
OPTIONS
X977
XA83
MAGNET
X976
XA86
X240
This magnet, which is assembled on the
Centerlock disc attachment nut, does not
magnet and the frame and will therefore
-
Damage to components caused by the use
of this magnet, or brake disc models other
NOT COMPATIBLE
OPTIONS
MAGNET
ORBEA
X095
ORBEA | 85
EN