5 S Us P E N S I O N S 1; Adjusting Marzocchi And Fox Forks - Orbea Blue Paper Rise Hydro 2023 Technisches Handbuch

118 | ORBEA
CONNECTION OF LIGHTS TO THE SHIMANO
EP801 RS MOTOR
Rise is not designed for the use of lights
connected to the motor, so the user and/or
Shimano dealer who wishes to perform this in-
IMPORTANT: Using lights connected to
the EP801 motor can considerably re-
duce your bicycle's range.
IMPORTANT: See the wiring section of this
manual for options related to SIC seals of
the HS02 headset collector and options
related to the front light cable outlet,
should you wish to install it.
Orbea's Rise assemblies do not have
lights. Orbea is not responsible for the
compatibility of aftermarket assemblies
installed by users or a dealer. Make sure
that components are compatible before
installing them.
TECHNICAL MANUAL
The Shimano EP801 motor allows lights to be connected
ever, an authorised Shimano dealer can enable the light
ports via Etube Professional by connecting the bike to the
It is possible to choose whether the lights will always be
on when the bike is switched on or whether the user can
IMPORTANT: There are laws that could require an
ebike with lights to automatically set aside a percent-
age of the battery charge to power the lights for a set
amount of time when the battery is running low by
switching off the motor assist. Always follow the reg-
ulations of the territory where you use your bicycle.
B LUE PAP ER R I SE · H YD R O 20 2 3
1 5 S US PE N S I ON S

ADJUSTING MARZOCCHI AND FOX FORKS

-
MANUFACTURER'S MANUALS
General user manual of Marzocchi forks:
Marzocchi Bomber Z2 fork setting:
Fox 34 Factory FIT4 fork setting 3 Positions:
Fox 36 Performance Grip fork setting:
Fox 36 Factory Grip2 fork setting:
FOX AND MARZOCCHI FORK SAG AND AIR PRESSURE ADJUSTMENT SUGGESTIONS
RECOMMENDED SAG MEASUREMENTS
Marzocchi Bomber Z2
Fox 34 Float
Fox 36 Float
ORBEA | 119
E N
Fork total 15% SAG 20% SAG
travel (Firm) (Soft)
140 mm 21 mm 28 mm
140 mm 21 mm 28 mm
150 mm 23 mm 30 mm