92 | ORBEA
DISMANTLING OF RS INTERNAL BATTERIES
6
6. Carefully remove the motor from the frame to avoid
7. Disconnect the cable running from the battery to the
TECHNICAL MANUAL
7
8.
Remember, when re-installing the bushings when in-
stalling the motor, the battery connection cable must
be routed over the left bushing to allow the motor to be
8
B LUE PAP ER R I SE · H YD R O 2 02 3
6
9
10. Pull on the battery cable tie to remove the battery
from the downtube, until the battery cable connector
11. Disconnect the battery cable by turning the locking
10
ORBEA | 93
9. Remove the bolts and washers securing the internal
11
E N