Orbea BLUE PAPER RISE HYDRO 2023 Technisches Handbuch Seite 42

82 | ORBEA
CONNECTION OF THE CABLE HARNESS
TO THE INTERNAL BATTERY
To connect the RS cable harness to the internal battery,
make sure that the pins and tab on the cable and the bat-
Once the cable harness connector and battery connector
make contact, turn the locking ring on the cable harness
connector anti-clockwise and press the cable connector
When the connection between the cable and the battery is
complete, release the locking ring so that it returns to the
TECHNICAL MANUAL
If the locking ring does not return to its original position
See the internal battery extraction and installation method
B LUE PAP ER R I SE · H YD R O 20 2 3
CABLE ROUTING IN THE MOTOR COMPARTMENT
AND DISASSEMBLY OF THE CABLE HARNESS
AND TURN ON BUTTON
The battery cable must be routed over the left inner motor
It is necessary to remove the motor from the frame to
See the section of this manual covering the disassembly
of the internal battery for the motor removal method for
Speed sensor
Display
Motor
Lights (option)
ORBEA | 83
E N
Derailleur
Dropper seatpost
Rear brake