John Bean B 2000P Betriebsanleitung Seite 94

6-28
94
"BALANCE"
Special conditions of the function
1
Spoked rims:
To divide the weight on a set of wheels with spoked
rims, in the Wheel Data Freezing function, after
clamping the second wheel (the fi rst following Freezing
activation) you must:
•
align one of the spokes on the 12 o'clock position and
press (1, Fig. 6-28) to enter the position.
Note:
The information about the number of spokes is
saved for the subsequent wheels, for which you
no longer need to enter the data item, whilst the 12
o'clock position must be set again for each wheel.
Manually changing a wheel data item:
If you change a data item in the RIM DATA INPUT
screen page, after selecting Wheel Data Freezing, the
freezing setting will be cancelled automatically and the
machine will proceed in MANUAL mode, considering
the data just entered. When the next wheel is clamped
on the balancer, the machine will perform the complete
scan of the profi les.
_
.. ..........