John Bean B 2000P Betriebsanleitung Seite 28

1
2
3
4
5
6 7
9a
9b
9c
9d
9e
8
4-5
28
Full Diagnostic
Balance with
Ruonout
Balance
Balance no
Spokes
Manual
11
10
9
Layout
4.1.2 Screen pages & Commands
The Display fi eld shows the main Operating Screen
Pages:
Each Screen Page contains basic commands, located
at the bottom in the Commands Field. Further com-
mands may be positioned in other parts of the screen,
with specifi c Screen Pages and operating phases.
Fig. 4-5 INTRO SCREEN
Basic screen / Main menu.
This is the initial Screen Page, activated immediately
after starting the machine. It can be reached from
any other Screen Page in the program using the
HOME key.
Commands:
1 - FULL DIAGNOSTIC key - L'equilibratrice effettua
anche la diagnosi del pneumatico. Una ricostruzione
tridimensionale della ruota sul video e l'uso di colori
identifi cativi, consentono di apprezzare aspetti quali
l'uniformità e l'usura del battistrada, la presenza di
eventuali difettosità della ruota.
2 - BALANCE WITH RUN OUT key - For selecting
the automatic (complete) balancing program, machine
performs tyre run-out and possibly rim run-out.
3 - BALANCE - Selects the automatic (complete)
balancing program.
4 - BALANCE NO SPOKES - Selects the automatic
balancing program, excluding the spoke identifi cation
process.
5 - MANUAL Data Entry - Selects the manual
balancing program.
6 - HELP key - Selects HELP texts for the current
F
function ( 4.3).
7 - BALANCING key - Opens the BALANCING Screen
Page.
8 - VEHICLE key - Allows selections; MOTORCYCLE (only
Manual), SPORTS CAR, TRUCK, SUV, CAR (
9 - SETTINGS MENU key - Opens the Settings Menu.
9a- PRINT key - Generates a print-out (If enabled)
9b- SETTINGS key - Opens the SETTINGS Screen
Page.
9c- CUSTOMER DATA ENTRY key - Opens the
Customer Data Entry Screen Page (
9d- USER CALIBRATION key - Starts User Calibration.
9e- COMPENSATION RUN key - Retrieves the
Compensation Run.
10 - PRESSURE key - Change the pre-set Infl ation
Pressure value.
11 - Rim Data Imput - Opens the Manual Data Entry
Screen
.. _ ..........
F
6.1.1).
F
9.7).