Filter Cleaning; Trigger Backwashing; Switching Times (Backwashing); Backwash Setting - Behncke Control 1.3 Betriebsanleitung

6.7.2 Filter cleaning

The following menu items are available in the Filter cleaning menu:
•

Trigger backwashing

• Backwashing switching times
• Backwashing settings (running time and type of backwash valve)
• Clear rinsing settings (running time and type of clear rinse valve)
• Pause for which the pump stops so that the valves can move
• Forced filtration running time over the pool channel after a backwashing
(selection only possible for channel pools)
6.7.2.1 Trigger backwashing
A backwash can be triggered via the submenu Processing/Filter cleaning/Backwashing.
Trigger the manual backwashing by confirming the query with the "Yes" button.
6.7.2.2

Switching times (backwashing)

The backwashing switching times can be adjusted in the submenu Processing/Filter cleaning/Switching
times. Here, you can select a backwashing time for every day in the week. In the basic configuration,
the switching time is defined as Thursday 4pm. The menu is shown in figure 3.
In the field , you can select the day for which the switching time applies.
1
In the field , you can adjust the time for the individual switching times.
2
In the field , you can adjust the repetition frequency for the individual switching times.
3
(Weekly, every 14 days, every 4 weeks)
6.7.2.3

Backwash setting

The backwashing parameters can be adjusted in the submenu Processing/Filter cleaning/Backwashing
settings. This is shown in figure 4.
Switching times
Individual days
Switching time
2
Figure 3: Backwashing switching times
Pool control system Control 1.3 / Operation
1
Thursday
Level
3
Weekly
OK
22