Transport, Packaging And Storage; Safety Instructions For Transport; Transport Inspections; Transporting / Storing - Behncke Control 1.3 Betriebsanleitung

4

Transport, packaging and storage

4.1 Safety instructions for transport

Unauthorised transport:

4.2 Transport inspections

Upon receipt, immediately check if the order is complete and check for any transport damage.
What to do if you identify external transport damage:
• Do not accept the delivery, or only accept it under reservation.
• Make a note of the extent of the damage on the transport documents or on the shipping company's
delivery note and take photographs for evidence.
• Initiate a complaint.

4.3 Transporting / storing

The connections to the power grid must be disconnected by an expert before transport.
The control system is delivered loose without a plug or wiring.

4.4 Packaging

Separate the packaging and recycle.
Pool control system Control 1.3 / Transport, packaging and storage
NOTE!
Damage due to be transported improperly:
A significant degree of material damage can be caused if transported
improperly.
• Proceed carefully when unloading packages during delivery and internal
transport, and observe the symbols on the packaging.
• Only use the intended anchor points.
• Only remove the packaging shortly before assembly.
• Only transport the control system using suitable aids and tools.
Complain about any defect as soon as it has been identified. Claims for
damages may only be made within the applicable complaints period.
IMPORTANT!
Secure the individually delivered components against transport damage.
Only store the control system in sheltered, frost-proof spaces with
a non-aggressive and non-explosive atmosphere.
14