Backwash Log; Messages; Set Language; Processing Settings Menu - Behncke Control 1.3 Betriebsanleitung

Pool control system Control 1.3 / Operation

6.6.5 Backwash log

The submenu "Backwash log" lists the following information on backwashes:
• the date on which the backwash was triggered
• the time at which the backwash was triggered
• the reason for which the backwash was triggered

6.6.6 Messages

The submenu "Messages" lists the following information on previous error messages:
• the date on which the message came in
• the time at which the message came in
• the reason for which the message came in

6.6.7 Set language

The user can set the language for the control system in the submenu "Language". Change the control
system language by pressing the respective blue button with the desired language.
This changes the button labels in all the menus. After pressing a language button, the system
automatically switches to the top menu level.

6.7 Processing settings menu

6.7.1 Switching times

The filter pump switching times are set in the submenu Processing/Switching times. This is shown
as a diagram in figure 2. Please set the parameters in the order in this instruction manual.
In the field , you can choose whether the switching times selected should be for individual days,
1
the same for each day, or whether they should be different weekdays and weekends.
In the field , you can select the day for which the 6 switching times apply.
2
In the field , you can adjust the time for the individual switching times.
3
In the field , you can adjust the mode for the individual switching times.
4
21
Switching times
Wknd/workdays
Switching time
3
Figure 2: Switching times submenu
1 2
Mon-Fri
Level
4
at
reduced
OK