Outputs; Module Slot; Dimensions And Installation Dimensions; Operating Conditions - Behncke Control 1.3 Betriebsanleitung

3.1.2 Outputs

Model
Outputs
Control 1.3

Module slot

3.2 Dimensions and installation dimensions

You'll also find the following technical drawing in our online shop.
www.behncke-onlineshop.de.

3.3 Operating conditions

The control system may only be operated under the following conditions:
• If all the wiring is carried out in accordance with the applicable standards / professionally.
• The room must be frost-proof.
• The room must be covered and dry.
• The room must have a non-aggressive atmosphere.
• The room must have a non-explosive atmosphere.
Name
3*230V / 10A A1
Triac 230V / 3A L1
Relay 230V / 3A L2
Relay 230V / 3A L3
A10 Floor valve
A11
A12
Potential-free
A13
closer 3A
A14
A15
A16
Potential-free
switch 3A
A17
Standard signal A18
A, B, C, D
Pool control system Control 1.3 / Technical data
Description
Filter pump
A2 Collector pump
A3 Heating pump
A4 UV lamp
A5 Dosing technology
A6 Filter request to OmniTronic/backwash valve
A7 Rinsing valve
A8 Lowering valve
A9 Fresh water valve
Release dosing technology
Heating
Speed 2
Speed 3
Speed 1
Collective fault signal/stop signal frequency converter
Valve collector
Filter pump speed
12