SICK PAC50 Betriebsanleitung Seite 99

Operating Instructions
PAC50-FGG (Leakage Tester)
After the measurement starts, the sensor switches directly to an error mode if pois not at least 0.02 bar
greater than the upper threshold Pl. The display turns red. In the display, "WARN" (display position CI)
appears underneath the current measured value, and "P<PI" (display position C2) and the value for p1
(e.g., "0.60" display position E2) or "P<P2"and the value for p2appear in the bottom line.
The message must be acknowledged
8017612/1DZP / 2022-06-231 PAC50
Subject to change without notice
Errors
by pressing - in order to set the sensor back to measurement
Operating Instructions I SICK
PAC50
standby.
99