SICK PAC50 Betriebsanleitung Seite 90

Operating Instructions
7.4.2 Menu structure, description
Display mode
Programming
mode
1
1
A RPI/ FLI Value
1
90 Operating Instructions
Operation and parameter
of the parameters, and factory
-1
RES YES/NO
DSI Value Switching
1
-1
DRI
Value
1
1
1
PARA
I SICK
settings
settings (Figure 14)
Description
Switching point 1/ upper window limit 1
Reset point 1/ lower window limit 1
Switching point 2 / upper window limit 2 (if second switching
output is available and not configured
Reset point 2 / lower window limit 2 (if second switching
available and not configured as a diagnostic
Resets the set parameters to the factory settings (also resets the
saved HIGH and LOW values)
delay 1
Reset delay 1
Switching delay 2 (if second switching
Reset delay 2 (if second switching
Switching function, switching output
Hysteresis function, normally open contact:
Hysteresis function, normally closed contact:
Window function, normally open contact:
Window function, normally closed contact:
8017612/1DZP
PAC50
as a diagnostic output)
output is
output)
output is available)
output is available)
1:
HNO
HNC
FNO
FNC
/ 2022-06-23 | PAC50
Subject to change without notice