Technical Data - Sick Pac50 Betriebsanleitung

Operating Instructions
9 Technical data
9.1 Features
Medium
Compressed air quality
Zero balancing
Measuring range
Process temperature
Switching outputs
Diagnostic output
8017612/1DZP / 2022-06-231 PAC50
Subject to change without notice
Technical
Dry compressed air
According to ISO 8573-1:2010
Max. particle size: 40 pm
Oil content: 0-40 mg/m3
The pressure dew point must be at least 15 oc below the ambient
temperature and must be max. 3 oc.
Max. 5% of the range
-1 bar ... O bar; -1 bar ... +1 bar; O bar ... +6 bar; O bar .
o oc ... 60 oc
1 or 2 transistor switching outputs
PNP/NPN/push-pull can be set (in variant with 10-Link: Switching
switching between 10-Link/PNP, and switching
Function: Normally open/normally
freely adjustable
Switching voltage: Supply voltage L+ -2 V [V DC]
Max. switching current per switching
Variants with 10-Link: 10-Link version
Switching delay: O s ... 50 s (programmable)
Switching time 5 ms
For variants with 2 switching outputs:
tic output. In the event of an error: See Table 8.2
data
+10 bar; -1 ... 10 bar
depending on the variant
output 2: Between PNP/NPN/push-pull)
closed contact, window and hysteresis
output: 100 mA
1.1
Switching output 2 can be used as a diagnos-
Operating Instructions
PAC50
and medium
output 1: Option of
function
I SICK 103