Product Description - Sick Pac50 Betriebsanleitung

Operating Instructions
Display mode
<up/inf0> Brief press:
No function
Long press:
Displays the set parameters
• SPI/
• RPI/
• SP2 / FH2 (if available)
• RP2/
• Analog output (if available)
• LOW
. HIGH
Brief press:
<down/menu>
No function
Long press:
Switches to programming
A password
correct password is entered, the device switches to programming
mode; otherwise,
Brief press:
< enter >
No function
Long press (> 200 ms) •+ starts the leakage measurement
this function
back to measurement
During the measurement,
a long press (> 2 seconds).
No function
Table 1: Pushbutton functions
70 Operating Instructions

Product description

FHI
FLI
FL2 (if available)
mode.
prompt appears if a password is set
it reverts back to display mode.
is available only with PAC50-FGG) or
standby (acknowledges
the measurement
SICK
Programming
Brief press:
• Moves menu up
• Increases/moves
Long press:
• Moves menu up
• Increases/moves
Brief press:
• Moves menu
• Decreases/moves
Long press:
• Moves menu
0000). If the • Decreases/moves
Brief press:
• Selects menu entry
• Confirms the set parameter
(if
sets the LT
the measurement)
can be canceled by
Simultaneous
• Returns to display mode
8017612/1DZP
PAC50
mode
parameter value up
parameter value up
down
parameter value down
down
parameter value down
value
press:
/ 2022-06-23 | PAC50
Subject to change without notice