SICK PAC50 Betriebsanleitung Seite 64

Operating Instructions
Select and implement wire cross-sections
ble standards
Check that mounting is correct and that the connecting
Do not open the housing
Observe the standard safety requirements
2.3.2 Mechanical connection,
Only authorized personnel
Only operate within the specified
Only use the accessories
Do not open, modify, or extend the product
Check that mounting has been carried out correctly
positioned appropriately
Do not use seals that are damaged
Do not install the seal using tools or pointed/sharp
Do not carry out assembly/disassembly
Do not subject the device to mechanical
Make sure that no mechanical
Do not allow the device to heat up to an unacceptable
compressed air. The minimum
Operating Instructions
Safety
and their correct fuse protection
when working on electrical systems
pressure connection
are permitted to perform
pressure range
provided
(replace them)
objects
while the system is under pressure
stress or attach
tension is caused by the pressure
permissible period for pressure fluctuations
I SICK
in accordance
cable is positioned appropriately
mounting work
and that the pressure connections/hoses
it under mechanical tension
connection and electrical
level as a result of repeated
Ap is specified in Figure 1.
8017612/1DZP
PAC50
with the applica-
are
connection
compression of the
/ 2022-06-23 | PAC50
Subject to change without notice