SICK PAC50 Betriebsanleitung Seite 92

Operating Instructions
92 Operating Instructions
Operation and parameter
PARA
PARA
UNIT Unit
1
c
OSET YES/NO
1
PARA
1
-1
YES/NO
1
SICK
settings
Description
Switching function, switching output 2
(if second switching output is available):
Hysteresis function, normally open contact:
Hysteresis function, normally closed contact:
Window function, normally open contact:
Window function, normally closed contact:
Diagnostic function: DIA
Switching logic for switching outputs:
(applies for both switching outputs,
available. QI is always PNP for the 10-Link option)
(if analog output is available):
Output signal 4...20 mA: I
Inverted output signal 20...4 mA: IINV
Output signal: 0...10 V: U
Inverted output signal 10...0 V: UINV
Automated detection depending on applied
(non-inverted output signals): AUTO
Unit of pressure setting in the display
Zero offset correction, max. 5%
Indication of switching points/window
and E: SPRP
Indication of LOW/HIGH values in display areas C and E: LoHi
Display update
Turns display indicator in the relevant display field upside down
electronically
8017612/1DZP
PAC50
HNO
HNC
FNO
FNC
PNP, NPN, or push-pull
if second switching output is
load resistance
limits in display areas C
/ 2022-06-23 | PAC50
Subject to change without notice