SICK PAC50 Betriebsanleitung Seite 80

Operating Instructions
5.2 Installation with a switch
5.2.1 Standard mounting
To install in a switch panel, use the switch panel mounting
Figure 8). The maximum switch panel thickness
section in the switch panel.
Figure 9: Switch panel mounting set
5.2.2 Rugged mounting set for challenging applications
To install in a switch panel, use the switch panel mounting
an accessory (see Figure 10). The maximum
sions of the cut-out section
80 Operating Instructions
Installation/Mechanical
panel mounting set
set - part 2069200
is 5 mm. Figure 9 shows the dimensions
switch panel thickness
in the switch panel.
I SICK
connection
set, which is available as an accessory
(shock/vibration) - part 2099916
set for rugged applications,
is 5 mm. Figure 11 shows the dimen-
8017612/1DZP
PAC50
(see
of the cut-out
which is available as
/ 2022-06-23 | PAC50
Subject to change without notice