Pushbuttons - Sick Pac50 Betriebsanleitung

Operating Instructions
4.1.4 Delay times (O to 50 s)
Setting a delay time prevents
(attenuation).
The pressure must be present for at least the set delay time to allow the switching
status. The switching output
it does so after the set delay time (see Figure 5).
p
1
Normally open
1
Normally closed
DS
Figure 5: Delay times
4.2

Pushbuttons

Table 1 displays the pushbutton functions
The pushbuttons can be operated without the need for tools (e.g., a ballpoint pen tip).
Do not press the pushbuttons
<up/info>
<enter>
<down/menu>
8017612/1DZP / 2022-06-231 PAC50
Subject to change without notice
Product description
unwanted switching of the switching
does not change its status
(for accurate parameter settings, see section 7).
using tools, sharp objects,
output during brief pressure
immediately on reaching the switching
or fingernails.
Operating
PAC50
changes
output to change its
event; instead,
Instructions I SICK 69