instagrid LINK MAX Benutzerhandbuch Seite 21

2 Important Safety Information
Read all safety information and instructions Non-compliance with the safety informa-
tion and instructions can cause electric shock, fire or serious injuries Keep all safety information and
instructions ready to hand near the equipment
High Voltage
• Instagrid LINK MAX works with
high voltage alternating current up to 400 V
(phase-phase) and with up to 16 A per phase
Contact with exposed electrical parts can lead to
serious injuries or death
• Never open or modify the housing There are no
parts inside that can be serviced by the user
The internal components include high voltage
contactors, insulation monitoring devices and
other electronic components that must not be
manipulated
• If the housing, the cables or the connections
of the device are damaged, immediately stop
operation and contact the Instagrid After
Sales Service
• Never connect any damaged cables and do
not bend any connectors Touching damaged
cables and connectors can lead to serious inju-
ries or death
• Immediately disconnect the device from the
power supply if you notice smoke, a burnt smell
or unusual noises Do not try to repair internal
parts yourself
• Do not bridge or deactivate any safety functions
such as the internal circuit breaker, the contac-
tors or the insulation monitoring device
• Only use accessories and cables approved by
Instagrid with Neutrik powerCON® TRUE1®
connections Third-party connectors can impair
the safety or functionality
Personnel Qualification
• Instagrid LINK MAX has been designed for
professional users or trained personnel who are
acquainted with the basic principles of alter-
nating current supply, earthing and the local
regulations
• Keep the device away from children and un-
trained persons
Work Environment
• Do not immerse the device in water and do not
hose down with a high-pressure water jet Mois-
ture can disable the safety functions
• Observe the recommended ambient temper-
atures (see Section 4.3.)
direct solar radiation or extreme heat
• Ensure the device is standing on a stable,
level surface or is correctly fastened on an Ins-
tagrid ONE
• Protect the device from accidental
tipping over, vibrations or impacts
• Ensure that a consumer to be connected is
switched off before it is connected with the
Instagrid LINK MAX to prevent an unintentional
activation of the consumer
• Connect a maximum of one
consumer to the output The use of multiple
sockets is not permitted
• Be sure to always fit the caps on the connections
when the device is not in use
Note on Packaging
• Your Instagrid LINK MAX may be shipped in
protective foam or custom packaging to prevent
mechanical or environmental damage Always
retain this packaging to transport the device
across short distances or if a return shipment is
necessary
• Follow all local regulations regarding the disposal
or recycling of packaging materials
and avoid prolonged
21