AERMEC MODUCONTROL Bedienungsanleitung Seite 55

MODUCONTROL
25/01 6343841_06
12 INSTALLER MENU
To access the INSTALLER menu, press the key in (Fig.9). Once the key has been pressed, you must insert the password to
access the various menus; to access the user menu, the password is 030. To modify the value of the passwords, use the arrow
keys. When you have inserted the correct password, press the key in (Fig.9). The monitor will show the index of the INSTALL-
ER parameter and a 3-character string that identifies it; the string will be displayed for one second, after which it is replaced
by the value of the parameter itself. To move on to the next parameter, use the arrow keys (Fig.10). To modify a parameter,
just select it, press the key in (Fig.9), modify the assigned value using the arrow keys in (Fig.10), and confirm the modification
by pressing the key in (Fig.9) again.

PASSWORD = 030
Fig. 9
Fig. 10
NOTICE
The following parameters must only be modified by qualified personnel authorised to install the unit.
55