AERMEC MODUCONTROL Bedienungsanleitung Seite 51

11 USER MENU
To access the USER menu, press the key in (Fig.7). Once the key has been pressed, you must insert the password to access the
various menus; to access the user menu, the password is 000 (displayed by default). To modify the value of the passwords,
use the arrow keys. When you have inserted the correct password, press the key in (Fig.7). The monitor will show the index
of the USER parameter and a 3-character string that identifies it; the string will be displayed for one second, after which it
is replaced by the value of the parameter itself. To move on to the next parameter, use the arrow keys (Fig.8). To modify a
parameter, just select it, press the key in (Fig.7), modify the assigned value using the arrow keys in (Fig.8), and confirm the
modification by pressing the key in (Fig.7) again.

PASSWORD = 000
Fig. 7
Fig. 8
11.1 SETTING OPERATIONAL PARAMETERS (USER LEVEL)
Key:
: Parameter ONLY visible on units suitable for production of hot water
: Parameter visible ONLY on units suitable for the production of DHW
: Parameter ONLY visible on units with condensation control device on board
: Parameter ONLY visible on units fitted with twin compressor
: Parameter ONLY visible on units fitted with inverter compressor
MODUCONTROL
25/01 6343841_06
51