Kemper KemJet Betriebsanleitung Seite 179

7.4 Emergency measures
In case of fire of the product or its detection elements, the following steps
should be taken if necessary:
1. Disconnect the product from the mains! If present; pull out mains plug;
set main switch to 0-position; disconnect supply fuses.
2. If present, disconnect the compressed air supply.
3. Fight fire with a commercially available dry powder extinguisher.
4. Notify local fire brigade if necessary.
WARNING
Do not open products with maintenance door. Flash flame formation!
In the event of a fire, do not touch the product under any circumstances
without proper protective gloves. Risk of burns!
15028844-00
Filter cartridges saturated
Tab. 91: Troubleshooting
- 179 -
EN