Kemper KemJet Betriebsanleitung Seite 167

5. Undo the screw on the connection plug (Pos. 11) and remove the plug
from the compressed air solenoid valve (Pos. 10).
6. Remove the compressed air pipework (Pos. 13) from the compressed air
solenoid. Undo the bolt connection (Pos. 12).
Fig. 106: Changing filters – removing the compressed air pipework
7. Carry out steps 5 + 6 for all filter mountings (Pos. 4). Disconnect the
compressed air pipework from the compressed air solenoid valves.
Fig. 107: Changing filters – removing the filter mounting
15028844-00 - 167 -
EN