Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING
This container must be disposed of properly. Never empty and reuse the
container.
For products with dust collection trolleys
7. Carefully pull the dust collection trolley from the lifting device without
swirling up dust particles and remove the frame with the dividers from
the dust collection trolley.
8. Close the disposal bag and properly dispose of it.
WARNING
This container must be disposed of properly. Never empty and reuse the
container.
9. Insert a new disposal bag into the dust collection trolley and place the
frame with the dividers on the dust collection trolley again.
10. Push the dust collection trolley back over the lifting device as far as it
will go. Then actuate the compressed air valve until the dust collection
trolley is pressed firmly against the sealing surface.
WARNING
Danger of crushing!
Make sure that no body parts or objects are located between the sealing
flange on the dust collection bucket/dust collection trolley and the dust
chute during the lifting process.
11. Now acknowledge the error message, close the maintenance door and
switch on the product again.
7.2.2 Changing the filter – Safety instructions
The life of the filter inserts depends on the type and amount of deposited
particles.
As the dust accumulation in the filter increases, its flow resistance
increases and the extraction capacity of the product decreases.
Even with products that may have automatic filter cleaning, adhering
deposits can reduce the extraction capacity.
15028844-00
- 157 -
EN
Werbung
