Kemper KemJet Betriebsanleitung Seite 134

1. Cover the sealing surfaces of the intake box (Pos. 6) with the enclosed
sealing tape
2. Mount the intake box (Pos. 6) to the filter system using the screws
provided.
3. Mount the intake pipe (Pos. 3) onto the connection box (Pos. 6) and
secure with self-tapping screws.
4. Place the duct connection (Pos. 2) onto the pipe (Pos. 3) and secure with
self-tapping screws.
5. Place the cover (Pos. 4) on the duct connection (Pos. 2) and secure with
self-tapping screws.
15028844-00
Fig. 79: Positions on the product
- 134 -
EN