Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Product information
3.1 Functional description
The product is suitable for extracting and filtering the room air and
returning the room air back into the room. The area of application includes
production halls and warehouses, in which the air in the room must be free
from particulate contamination such as smoke and dust.
The contaminated air is sucked in through the intake grilles of the piping
system. The filter unit retains the particles fed with it, such as fumes and
dust, with a filter efficiency higher than 99%. The deposited particles collect
on the surface of the filter cartridges, which leads to a slow increase in the
pressure difference at the filter cartridges. The intelligent control system
monitors this process and initiates cleaning as required. A blast of
compressed air is precisely distributed across the total filter surface of each
filter cartridge via a rotating nozzle. The deposited particles are dislodged
and fall into the dust collection container in the lower section of the
product. The filter cartridges are cleaned during operation; interruption of
work is not necessary. A post-cleaning process is performed once the
product has been switched off.
The cleaned air flows upwards inside the filter cartridges into the clean air
area of the product and is returned to the work area via the blower unit.
The product is delivered in two optional variants:
•
Product with intake pipe system
•
Product with duct connection (suction basket)
15028844-00
- 111 -
EN
Werbung
