Kemper KemJet Betriebsanleitung Seite 132

Pos. Description
7 Intake box
8 Ducting system
9 Wall mount bracket
1. Cover the sealing surfaces of the intake box (Pos. 7) with the enclosed
sealing tape
2. Mount the intake box (Pos. 7) to the filter system using the screws
provided.
3. Depending on the mounting variant, mount the intake pipe as shown in
the illustration. When laying and fixing, ensure that the mounting
complies with standards.
4. Fix the pipe connections with the self-tapping screws and seal any leaks
with the enclosed sealing tape.
15028844-00
Pos.
10
11
Tab. 60: Floor mounting – intake pipe
- 132 -
Description
Air intake grille
Support
EN