Kemper KemJet Betriebsanleitung Seite 164

NOTE
For disassembly or for better access to the filter cartridges, it may be
necessary to remove the rotating nozzles.
Pos. Description
3 Filter cartridge
6 Disposal bag
10. Undo the hexagon nut (Pos. 8) by turning it anti-clockwise while
simultaneously tightening the locknut and unscrewing the pipe of the
rotating nozzle (Pos. 7).
11. After removing the contaminated filter cartridges, the maintenance
room must be cleaned. Use a suitable vacuum cleaner of filter class M
or, better yet, clean the maintenance room.
12. The new filter cartridges are installed in the reverse order.
13. When installing the new filter cartridges, make sure that the seals of the
filter cartridges are clean and flush with the cartridge mounting plate.
After replacing the filter, carry out the following steps:
1. Screw/close maintenance doors.
15028844-00
Fig. 103: Removing the rotating nozzles
Tab. 82: Removing the rotating nozzles
- 164 -
Pos. Description
7 Rotating nozzle
8 Hexagon nut
EN