Kemper KemJet Betriebsanleitung Seite 125

5.1 Unpacking and assembling the product
1. Use a forklift to raise the product using the forklift pockets and remove
the pallet.
2. The product must now be positioned on a suitable base which must be
as level as possible. The product does not need to be fixed to the base.
3. Open the door to the dust collection area in the lower section of the
product. Any accessories must be removed from the free spaces and
15028844-00
Fig. 70: Transporting the product
Fig. 71: Installation
- 125 -
EN