Kemper KemJet Betriebsanleitung Seite 153

The product must be fully installed before commissioning begins. All
doors must be closed and the necessary connections must have been
made.
1. Ensure that the product is supplied with compressed air and power.
2. Press the main switch of the product.
3. Switch on the product using the button on the operating control
labelled "0" and "I".
4. The fan starts and the display indicates error-free operation of the
product.
5. Fault-free operation is signalled by a green background in the operating
display.
If there is a fault, please refer to the "Troubleshooting" chapter.
15028844-00 - 153 -
EN