HITWAY BK5 Originalbetriebsanleitung Seite 65

Install the seat tube
1
Pull the seat tube
adjustment quick
release lever in the
direction of the arrow
in the picture.
Install the bell
Put the bell bracket into the
corresponding position of
the handlebar.
Use a Phillips screwdriver
to tighten the screws.
Deutsch /
Insert the seat tube and
adjust to the desired height.
(63)
English / Français / Español / Italiano / Nederlands / Polski
Press the quick release
wrench in the direction of
the arrow in the figure
Note: If the folding wrench
is too tight or too loose,
please adjust the screw at
"1" appropriately